Scientific and quality aluminum and glass door installation process

Aluminum and glass door installation process what is science? You are looking to install aluminum and glass doors for your project because of its superior features compared to other conventional door lines. However, you have no experience in this field? This article will introduce you to the installation process xingfa aluminum door exactly.

Enclosure positioning

– The first thing you need to do in aluminum and glass door installation process main analysis and obtain technical standards for installation
– Carefully perform manipulations to position the outer frame in the correct position and design

Fine-tune perpendicularity, parallelism, curvature, sag, illuminance and livo
Careful Install aluminum and glass doors by manipulating the elevation of the corners, making gaps between the frame and the wall
– The next process is drilling and cutting and taking temporary impressions of the outer frame to the wall.
Use M10 x 100 expansion screws to apply the remaining areas 
Use expansion screws of type M8 x 90 in airtight areas and low floors
Distance of adjacent screws approx. 600 mm

Stitch to position the wing frame 

This is one of the most important steps in aluminum and glass door installation process. Knife is a component part that has been tested for operation before packaging and shipment. When installing, pay attention to the following factors:

• Precise direction of operation
• Smooth operation
• Standard set of textures

Construction and installation of other details

– Panels
 – Hinges, armrests of aluminum and glass doors
– Glasses and glasses brackets
– Handles for the doors

Adjusting and perfecting the operating structure

– Check, evaluate and re-tighten the adjusted positions
– Adjust operating mechanisms such as: transmission rods, hinges, locks, sliding wheels, latches to make the door work well, and tight.
– The holes drilled and punched on the Profile are covered with a specialized plastic cap

Glue pump

Clean

Complete aluminum and glass door installation process with careful cleaning operations.
– Follow the cleaning and greasing steps according to the instructions for the metal fittings
- Do not peel off the protective paper of Profile
– Clean glass and open Profile surfaces
- Clean up the construction site
To perform aluminum and glass door installation process standards and certainly always need the meticulousness and high precision of the craftsman. You are looking for a unit to construct safe and quality doors for your project, please contact us immediately. SUNSPACE for assistance.

SUNSPACE WINDOW JOINT STOCK COMPANY

 Hanoi: ADG Tower, 37 Le Van Thiem, Thanh Xuan District

 Hotline: 1900.98.98.48 – Tel: (024) 44 55 00 66

 HCM: SAIGON PRIME Building – No. 107-109-111 Nguyen Dinh Chieu, District 3

 Tel: (028) 62 57 78 55

 FACTORY : D3 Street, Pho Noi A Industrial Park, Yen My, Hung Yen

FANPAGE FACEBOOK: SUNSPACE

>>For more information: Xingfa aluminum door, aluminum door system, High quality aluminum doors, standard aluminum door, aluminum door with glass wall, Glass edge, High quality aluminum doors, high-class crabs, high-rise door, quotation for aluminum doors xingfa 2021, xingfa aluminum door quote, xingfa aluminum door price, xingfa aluminum door, Xingfa's group , aluminum and glass accessories, tempered glass, safety laminated glass, aluminum profiles, glass wall system, upvc door system, automatic glass door system, rolling door system, façade partition wall system